Posted on: November 29, 2019 Posted by: admin Comments: 0

AINOL NOVO 10 HERO ADB DRIVER DOWNLOAD

On a clean microSD flash drive formatted in Fat32 with a standard cluster, put the firmware files for example, firmware On the computer, open the command line, write Adb sideload “path to the firmware file on the disk” First the file is filled see the progress of the upload , then it is installed in the same way as in the case of firmware from the card. If you missed that you probably missed other stuff. The link is the same as the one before: Again, do this at your own risk and if anyone know if I made any errors here or has a better way of doing this, let me know. I found that I couldn’t boot into the recovery on the 4 Gb this time sd card – just a hang on the green droid.

Uploader: Mazum
Date Added: 7 March 2004
File Size: 65.33 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 21751
Price: Free* [*Free Regsitration Required]

Voila appeared the Recovery. It is treated by editing build.

Posted 19 May – I flashed everything a second time and all was OK. If i then try to reset with metal pin, the tablet is bricked again and i cant even boot when i take the sd card out Well, then the animator Cyanogen. We strongly recommend that you read Rules section “Android – firmware” New themes should be created only root novk Yes, go back and read the guide again. Download the archive with our firmware v2 2. I was able to use the unbrick procedure with the pin short, etc and loaded v2 OK.

  M7803 APPLE KEYBOARD DRIVER

Sway here on the Yandex disk on the people.

Ainol Novo 10 Hero II Inch Quad Core Tablet PC Dual Camera WIFI HDMI 16GB

Back to Ainol Novo 10 Hero. I tried flashing and TWRP. Pull out the USB flash drive.

That’s all for now Turn off the device. It should work for all Amlogic based axb and will work even if you are deep or hard bricked. As an image, we slip the image from the downloaded archive.

Posted 22 May – Open the contents of the flash drive on hrro computer and delete the Fire firmware file zip about Mb in size and copy it to it with the replacement files NovoHero The solution is simple. Edited by fuser-invent, 23 May – Instructions for lifting a “heavy” brick from cem4ik for which he thank you so much. If you sure that you have the correct TWRP zip then flash it to replace the recovery.

Theme is looking for a curator! If adb was installed earlier, you might need to update it. I can only flash if I use the rescue SD card method.

  LOGITECH QUICKCAM N231 DRIVER

Ainol Novo 10 Hero II 10.1 Inch Quad Core Tablet PC Dual Camera WIFI HDMI 16GB

Install the firmware with “update zip from SD card” or update from ext – first, then apses and the rest. Also a couple people mentioned the first time noo hold the buttons down to start the process nothing happens but the second time it works or that they have to hold the buttons down and then pulse the power button while continuing to hold down the vol- button.

You currently have javascript disabled. Backlight comes on USB detects as libusb worldcup device but no display.

[HOW TO] Unbrick your Ainol Hero

I do not observe a green bastard at all. See his thread here. If those don’t work then you can try the Hero Rescue SD image which is the firmware.

All of the unbricking tools I’ve collected are here. I have had a small amount of progress Initial state was, No boot of any kind, black screen but backlight activates.

Categories:

Leave a Comment